Deep-Blue and Fast Delayed Fluorescence from Carbene-Metal-Amides for Highly Efficient and Stable Organic Light-Emitting Diodes.

Linear gold complexes of the "carbene-metal-amide" (CMA) type are prepared with a rigid benzoguanidine amide donor and various carbene ligands. These complexes emit in the deep-blue range at 424 and 466 nm with 100% quantum yields in all media. The deep-blue thermally activated delayed fluorescence (TADF) originates from a charge transfer state (CT) with an excited state lifetime as low as 213 ns, resulting in fast radiative rates of 4.7 × 106 s-1. The high thermal and photo-stability of these CMA materials enabled us to fabricate highly energy efficient organic light-emitting diodes (OLED) in host-guest architectures. We report deep-blue OLED devices with electroluminescence at 416 nm and 457 nm with practical external quantum efficiencies of up to 23% at 100 cd m-2 with excellent colour coordinates CIE (x; y) = 0.16; 0.07 and 0.17; 0.18. The operating stability of these OLEDs is the longest reported to date (LT50 = 1 hour) for deep-blue CMA emitters, indicating a high promise for further development of blue OLED devices. Our findings inform the molecular design strategy and correlation between delayed luminescence with high radiative rates and CMA OLED device operating stability. This article is protected by copyright. All rights reserved.

Understanding Spin-Triplet Excited States in Carbene-Metal-Amides.

Carbene-metal-amides (CMAs) are emerging delayed fluorescence materials for organic light-emitting diode (OLED) applications. CMAs possess fast, efficient emission owing to rapid forward and reverse intersystem crossing (ISC) rates. The resulting dynamic equilibrium between singlet and triplet spin manifolds distinguishes CMAs from most purely organic thermally activated delayed fluorescence emitters. However, direct experimental triplet characterization in CMAs is underutilized, limiting our detailed understanding of the ISC mechanism. In this work, we combine time-resolved spectroscopy with tuning of state energies through environmental polarity and metal substitution, focusing on the interplay between charge-transfer (3CT) and local exciton (3LE) triplets. Unlike previous photophysical work, we investigate evaporated host:guest films of CMAs and small-molecule hosts for increased device relevance. Transient absorption reveals an evolution in the triplet excited-state absorption (ESA) consistent with a change in orbital character between hosts with differing dielectric constants. Using quantum chemical calculations, we simulate ESAs of the lowest triplet states, highlighting the contribution of only 3CT and donor-moiety 3LE states to spectral features, with no strong evidence for a low-lying acceptor-centered 3LE. Thus, our work provides a blueprint for understanding the role of triplet excited states in CMAs which will enable further intelligent optimization of this promising class of materials.

Phosphorescent Carbene-Gold-Arylacetylide Materials as Emitters for Near UV-OLEDs.

A series of carbene-gold-acetylide complexes [(BiCAAC)AuCC]n C6 H5- n (n = 1, Au1; n = 2, Au2; n = 3, Au3; BiCAAC = bicyclic(alkyl)(amino)carbene) have been synthesized in high yields. Compounds Au1-Au3 exhibit deep-blue to blue-green phosphorescence with good quantum yields up to 43% in all media. An increase of the (BiCAAC)Au moieties in gold complexes Au1-Au3 increases the extinction coefficients in the UV-vis spectra and stronger oscillator strength coefficients supported by theoretical calculations. The luminescence radiative rates decrease with an increase of the (BiCAAC)Au moieties. The time-dependent density functional theory study supports a charge-transfer nature of the phosphorescence due to the large (0.5-0.6 eV) energy gap between singlet excited (S1 ) and triplet excited (T1 ) states. Transient luminescence study reveals the presence of both nonstructured UV prompt-fluorescence and vibronically resolved long-lived phosphorescence 428 nm. Organic light-emitting diodes (OLED) are fabricated by physical vapor deposition with 2,8-bis(diphenylphosphoryl)dibenzo[b,d]furan (PPF) as a host material with complex Au1. The near-UV electroluminescence is observed at 405 nm with device efficiency of 1% while demonstrating OLED device lifetime LT50 up to 20 min at practical brightness of 10 nits, indicating a highly promising class of materials to develop stable UV-OLEDs.

The Equilibrium Molecular Structure of Cyclic (Alkyl)(Amino) Carbene Copper(I) Chloride via Gas-Phase Electron Diffraction and Quantum Chemical Calculations.

Copper-centered carbene-metal-halides (CMHs) with cyclic (alkyl)(amino) carbenes (CAACs) are bright phosphorescent emitters and key precursors in the synthesis of the highly promising class of the materials carbene-metal-amides (CMAs) operating via thermally activated delayed fluorescence (TADF). Aiming to reveal the molecular geometry for CMH phosphors in the absence of the intermolecular contacts, we report here the equilibrium molecular structure of the (CAAC)Cu(I)Cl (1) molecule in the gas-phase. We demonstrate that linear geometry around a copper atom shows no distortions in the ground state. The structure of complex 1 has been determined using the electron diffraction method, supported by quantum chemical calculations with RI-MP2/def2-QZVPP level of theory and compared with the crystal structure determined by X-ray diffraction analysis. Mean vibrational amplitudes, uij,h1, and anharmonic vibrational corrections (rij,e • rij,a) were calculated for experimental temperature T = 20 °C, using quadratic and cubic force constants, respectively. The quantum theory of atoms in molecules (QTAIM) and natural bond order (NBO) analysis of wave function at MN15/def2TZVP level of theory revealed two Cu…H, three H…H, and one three-center H…H…H bond paths with bond critical points. NBO analysis also revealed three-center, four-electron hyperbonds, (3c4e), [π(N-C) nπ(Cu) ↔ nπ(N) π(N-Cu)], or [N-C: Cu ↔ N: C-Cu] and nπ(Cu) → π(C-N)* hyperconjugation, that is the delocalization of the lone electron pair of Cu atom into the antibonding orbital of C-N bond.

Highly phosphorescent carbene-metal-carboranyl complexes of copper(I) and gold(I).

New phosphorescent "carbene-metal-carboranyl" (CMC) Cu(I) and Au(I) complexes based on the diamidocarbene (DAC) ligand show up to 68% photoluminescence quantum yield and microsecond range lifetimes. CMC organic light emitting diodes (OLEDs) emit sky-blue and warm white electroluminescence.

Organic thermally activated delayed fluorescence material with strained benzoguanidine donor.

Organic thermally activated delayed fluorescence (TADF) materials have been widely investigated due to their impressive electronic properties and applied potential for the third generation of organic light-emitting diodes (OLED). We present organic TADF material (4BGIPN) based on the strained benzoguanidine donor and compare it with the benchmark carbazole-based material (4CzIPN). Extended π-conjugation in 4BGIPN material results in yellow-green luminescence at 512 nm with a fast radiative rate of 5.5 × 10-5 s-1 and a photoluminescence quantum yield of 46% in methylcyclohexane solution. Such a nitrogen-rich 4BGIPN material has a significantly stabilized highest occupied molecular orbital (HOMO) at -6.4 eV while the lowest unoccupied molecular orbital (LUMO) at -4.0 eV, indicating potential suitability for application as the electron transport layer or TADF class III emitter in OLEDs.

Reversible spin-optical interface in luminescent organic radicals.

Molecules present a versatile platform for quantum information science1,2 and are candidates for sensing and computation applications3,4. Robust spin-optical interfaces are key to harnessing the quantum resources of materials5. To date, carbon-based candidates have been non-luminescent6,7, which prevents optical readout via emission. Here we report organic molecules showing both efficient luminescence and near-unity generation yield of excited states with spin multiplicity S > 1. This was achieved by designing an energy resonance between emissive doublet and triplet levels, here on covalently coupled tris(2,4,6-trichlorophenyl) methyl-carbazole radicals and anthracene. We observed that the doublet photoexcitation delocalized onto the linked acene within a few picoseconds and subsequently evolved to a pure high-spin state (quartet for monoradical, quintet for biradical) of mixed radical-triplet character near 1.8 eV. These high-spin states are coherently addressable with microwaves even at 295 K, with optical readout enabled by reverse intersystem crossing to emissive states. Furthermore, for the biradical, on return to the ground state the previously uncorrelated radical spins either side of the anthracene shows strong spin correlation. Our approach simultaneously supports a high efficiency of initialization, spin manipulations and light-based readout at room temperature. The integration of luminescence and high-spin states creates an organic materials platform for emerging quantum technologies.

Tailoring Carbene-Metal-Amides for Thermally Activated Delayed Fluorescence: A Computationally Guided Study on the Effect of Cyclic (Alkyl)(amino)carbenes.

Gold-centered carbene-metal-amides (CMAs) containing cyclic (alkyl)(amino)carbenes (CAACs) are promising emitters for thermally activated delayed fluorescence (TADF). Aiming at the design and optimization of new TADF emitters, we report a density functional theory study of over 60 CMAs with various CAAC ligands, systematically evaluating computed parameters in relation to photoluminescence properties. The CMA structures were primarily selected based on experimental synthesis prospects. We demonstrate that TADF efficiency of the CMA materials originates from a compromise between oscillator strength coefficients and exchange energy (ΔEST). The latter is governed by the overlap of HOMO and LUMO orbitals, where HOMO is localized on the amide and LUMO over the Au-carbene bond. The S0 ground and excited T1 states of the CMAs adopt approximately coplanar geometry of carbene and amide ligands, but rotate perpendicular in the excited S1 states, resulting in degeneracy or near-degeneracy of S1 and T1, accompanied by a decrease in the S1-S0 oscillator strength from its maximum at coplanar geometries to near zero at rotated geometries. Based on the computations, promising new TADF emitters are proposed and synthesized. Bright CMA complex (Et2CAAC)Au(carbazolide) is obtained and fully characterized in order to demonstrate that excellent stability and high radiative rates up to 106 s-1 can be obtained for the gold-CMA complexes with small CAAC-carbene ligands.

Excited-State Lifetime Modulation by Twisted and Tilted Molecular Design in Carbene-Metal-Amide Photoemitters.

Carbene-metal-amides (CMAs) are an emerging class of photoemitters based on a linear donor-linker-acceptor arrangement. They exhibit high flexibility about the carbene-metal and metal-amide bonds, leading to a conformational freedom which has a strong influence on their photophysical properties. Herein we report CMA complexes with (1) nearly coplanar, (2) twisted, (3) tilted, and (4) tilt-twisted orientations between donor and acceptor ligands and illustrate the influence of preferred ground-state conformations on both the luminescence quantum yields and excited-state lifetimes. The performance is found to be optimum for structures with partially twisted and/or tilted conformations, resulting in radiative rates exceeding 1 × 106 s-1. Although the metal atoms make only small contributions to HOMOs and LUMOs, they provide sufficient spin-orbit coupling between the low-lying excited states to reduce the excited-state lifetimes down to 500 ns. At the same time, high photoluminescence quantum yields are maintained for a strongly tilted emitter in a host matrix. Proof-of-concept organic light-emitting diodes (OLEDs) based on these new emitter designs were fabricated, with a maximum external quantum efficiency (EQE) of 19.1% with low device roll-off efficiency. Transient electroluminescence studies indicate that molecular design concepts for new CMA emitters can be successfully translated into the OLED device.

Organic persistent room temperature phosphorescence enabled by carbazole impurity.

The molecular design of metal-free organic phosphors is essential for realizing persistent room-temperature phosphorescence (pRTP) despite its spin-forbidden nature. A series of halobenzonitrile-carbazoles has been prepared following a one-pot nucleophilic substitution protocol involving commercially available and laboratory-synthesized carbazoles. We demonstrate how halo- and cyano-substituents affect the molecular geometry in the crystal lattice, resulting in tilt and/or twist of the carbazole with respect to the phenyl moiety. Compounds obtained from the commercially available carbazole result in efficient pRTP of organic phosphors with a high quantum yield of up to 22% and a long excited state lifetime of up to 0.22 s. Compounds obtained from the laboratory-synthesized carbazole exhibit thermally activated delayed fluorescence with an excited state lifetime in the millisecond range. In-depth photophysical studies reveal that luminescence originates from the mixed locally excited state (3LE, nπ*)/charge transfer state.

Synthesis and photophysical properties of linear gold(I) complexes based on a CCC carbene.

The reaction between allenylpyridine (L1) and (Me2S)AuCl resulted in the quantitative formation of the (Indolizy)gold chloride complex 1 (Indolizy = indolizin-2-ylidene). The reaction of 1 with carbazole in the presence of KOtBu affords the corresponding (Indolizy)Au(Cz) complex 2. Both compounds show high air- and temperature stability. The crystal structure of 2 confirmed the linear co-planar geometry. Complex 1 shows an intense low energy absorption of mixed character in the UV-vis spectrum, ascribed to intraligand and (M + Hal)L charge transfer processes, and exhibits bright yellow phosphorescence with an excited state lifetime of 62.8 µs in the crystal and a luminescence quantum yield up to 65%. On the other hand, the carbazolate complex 2 in a polystyrene matrix shows bright red delayed fluorescence at 617 nm with a sub-microsecond excited state lifetime and a quantum yield of 21.6%.

Highly efficient blue organic light-emitting diodes based on carbene-metal-amides.

Carbene-metal-amides are soluble and thermally stable materials which have recently emerged as emitters in high-performance organic light-emitting diodes. Here we synthesise carbene-metal-amide photoemitters with CF3-substituted ligands to show sky-blue to deep-blue photoluminescence from charge-transfer excited states. We demonstrate that the emission colour can be adjusted from blue to yellow and observe that the relative energies of charge transfer and locally excited triplet states influence the performance of the deep-blue emission. High thermal stability and insensitivity to aggregation-induced luminescence quenching allow us to fabricate organic light-emitting diodes in both host-free and host-guest architectures. We report blue devices with a peak external quantum efficiency of 17.3% in a host-free emitting layer and 20.9% in a polar host. Our findings inform the molecular design of the next generation of stable blue carbene-metal-amide emitters.

Carbene metal amide photoemitters: tailoring conformationally flexible amides for full color range emissions including white-emitting OLED.

Conformationally flexible "Carbene-Metal-Amide" (CMA) complexes of copper and gold have been developed based on a combination of sterically hindered cyclic (alkyl)(amino)carbene (CAAC) and 6- and 7-ring heterocyclic amide ligands. These complexes show photoemissions across the visible spectrum with PL quantum yields of up to 89% in solution and 83% in host-guest films. Single crystal X-ray diffraction and photoluminescence (PL) studies combined with DFT calculations indicate the important role of ring structure and conformational flexibility of the amide ligands. Time-resolved PL shows efficient delayed emission with sub-microsecond to microsecond excited state lifetimes at room temperature, with radiative rates exceeding 106 s-1. Yellow organic light-emitting diodes (OLEDs) based on a 7-ring gold amide were fabricated by thermal vapor deposition, while the sky-blue to warm-white mechanochromic behavior of the gold phenothiazine-5,5-dioxide complex enabled fabrication of the first CMA-based white light-emitting OLED.

Synthesis of copper(i) cyclic (alkyl)(amino)carbene complexes with potentially bidentate N

The reaction of (Me2L)CuCl with either NaS2CX [X = OEt, NEt2 or carbazolate (Cz)] or with 1,3-diarylguanidine, 1,3-diarylformamidine or thioacetaniline in the presence of KOtBu affords the corresponding S- or N-bound copper complexes (Me2L)Cu(S^S) 1-3, (Me2L)Cu(N^N) 4/5 and (Me2L)Cu(N^S) 6 (aryl = 2,6-diisopropylphenyl; Me2L = 2,6-bis(isopropyl)phenyl-3,3,5,5-tetramethyl-2-pyrrolidinylidene). The crystal structure of (Me2L)Cu(S2CCz) (3) confirmed the three-coordinate geometry with S^S chelation and perpendicular orientation of the carbene and S^S ligands. On heating 3 cleanly eliminates CS2 and forms (Me2L)CuCz. The N-bound complexes show strongly distorted T-shaped (4) or undistorted linear (5) geometries. On excitation with UV light the S-bound complexes proved non-emissive, while the guanidinato and formamidinato complexes are strongly phosphorescent, with excited state lifetimes in the range of 11-24 µs in the solid state. The conformationally flexible formamidinato complex 5 shows intense green-white phosphorescence with a solid-state quantum yield of >96%.

Ultrafast Structure and Dynamics in the Thermally Activated Delayed Fluorescence of a Carbene-Metal-Amide.

Thermally activated delayed fluorescence has enormous potential for the development of efficient light emitting diodes. A recently discovered class of molecules (the carbene-metal-amides, CMAs) are exceptionally promising as they combine the small singlet-triplet energy gap required for thermal activation with a large transition moment for emission. Calculations suggest excited state structural dynamics modulate the critical coupling between singlet and triplet, but they disagree on the nature of those dynamics. Here we report ultrafast time-resolved transient absorption and Raman studies of CMA photodynamics. The measurements reveal complex structural evolution following intersystem crossing on the tens to hundreds of picoseconds time scale, and a change in the low-frequency vibrational spectrum between singlet and triplet states. The latter is assigned to changes in Raman active modes localized on the metal center.

Efficient Vacuum-Processed Light-Emitting Diodes Based on Carbene-Metal-Amides.

Efficient vacuum-processed organic light-emitting diodes are fabricated using a carbene-metal-amide material, CMA1. An electroluminescence (EL) external quantum efficiency of 23% is achieved in a host-free emissive layer comprising pure CMA1. Furthermore external quantum efficiencies of up to 26.9% are achieved in host-guest emissive layers. EL spectra are found to depend on both the emissive-layer doping concentration and the choice of host material, enabling tuning of emission color from mid-green (Commission Internationale de l'Éclairage co-ordinates [0.24, 0.46]) to sky blue ([0.22 0.35]) without changing dopant. This tuning is achieved without compromising luminescence efficiency (>80%) while maintaining a short radiative lifetime of triplets (<1 µs).

Correction: Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence.

Correction for 'Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence' by Alexander S. Romanov et al., Chem. Commun., 2016, 52, 6379-6382.

Synthesis, structure and cytotoxicity of cyclic (alkyl)(amino) carbene and acyclic carbene complexes of group 11 metals.

A series of complexes of cyclic (alkyl)(amino)carbene (CAAC) complexes of copper, silver and gold have been investigated for their antiproliferative properties. A second series of acyclic carbene (ACC) complexes of gold(i) were prepared by nucleophilic attack on isocyanide complexes by amines and amino esters, to give (ACC)AuCl, [(ACC)Au(PTA)]+ (PTA = triazaphosphaadamantane), as well as mixed-carbene compounds [(CAAC)Au(ACC)]+. Representative complexes were characterised by X-ray diffraction which confirmed the mononuclear linear structures without close intermolecular contacts or aurophilic interactions. The redox properties of these complexes have been determined. The compounds were tested against a panel of human cancer cell lines including leukemia (HL 60), breast adenocarcinoma cells (MCF-7) and human lung adenocarcinoma epithelial cell lines (A549), which show varying degrees of cisplatin resistance. The pro-ligand iminium salts and the PTA complexes were non-toxic. By contrast, the CAAC complexes show high cytotoxicity, with IC50 values in the sub-micromolar to ∼100 nanomolar range, even against cisplatin-insensitive MCF-7 and A549 cells. Cationic bis-carbene complexes [(Me2CAAC)2M]+ (6-8, M = Cu, Ag and Au) proved particularly effective. The mechanism of cell growth control by these complexes remains to be established, although possible modes of action such as inhibition of thioredoxin reductase (TrxR), which is a common pathway for gold NHC compounds, or the formation of reactive oxygen species (ROS) through redox processes, could be ruled out as primary pathways.

The First Triple-Decker Complex with a Carbenium Center, [CpCo(µ-C3 B2 Me5 )RuC5 Me4 CH2 ]+ : Synthesis, Reactivity, X-Ray Structure, and Bonding.

The first derivative of the methylium cation with the triple-decker substituent, [CpCo(C3 B2 Me5 )RuC5 Me4 CH2 ]PF6 (2PF6 ), was synthesized from the reaction of the triple-decker complex CpCo(C3 B2 Me5 )RuCp* (1) with the salt of the trityl cation [CPh3 ]+ . The X-ray crystal structure of 2PF6 reveals that the methylium carbon is bound to the ruthenium with Ru-C bond length of 2.259 Šand corresponds to the description of its structure as η6 -fulvene-ruthenium. Reactions of 2PF6 with nucleophiles OH- , Ph3 P, Et3 N led to the corresponding derivatives of 1 in high yields. Aromatic amines PhNEt2 and 4-MeC6 H4 NH2 react with 2PF6 to give the electrophilic aromatic substitution products quantitatively. Chemical reduction of 2PF6 with Zn powder in tetrahydrofuran leads to the formation of the bis(triple-decker) derivative (CpCo(C3 B2 Me5 )RuC5 Me4 CH2 )2 (10) with a CH2 CH2 -bridge. The structures of complexes 4, 7-10 were determined by X-ray diffraction. Density functional calculations support the crystallographically determined geometry of 2 and allow rationalization of some characteristics of its structure, spectroscopy, and reactivity.

High-performance light-emitting diodes based on carbene-metal-amides.

Organic light-emitting diodes (OLEDs) promise highly efficient lighting and display technologies. We introduce a new class of linear donor-bridge-acceptor light-emitting molecules, which enable solution-processed OLEDs with near-100% internal quantum efficiency at high brightness. Key to this performance is their rapid and efficient utilization of triplet states. Using time-resolved spectroscopy, we establish that luminescence via triplets occurs within 350 nanoseconds at ambient temperature, after reverse intersystem crossing to singlets. We find that molecular geometries exist at which the singlet-triplet energy gap (exchange energy) is close to zero, so that rapid interconversion is possible. Calculations indicate that exchange energy is tuned by relative rotation of the donor and acceptor moieties about the bridge. Unlike other systems with low exchange energy, substantial oscillator strength is sustained at the singlet-triplet degeneracy point.